Sportbike Racing Forum banner

1 - 20 of 22 Posts

·
Registered
Joined
·
4,510 Posts
Discussion Starter · #1 ·
i put on a yosh bolt on about a month ago on my gixxer 600. i was told that you dont have to remap your fuel if it's just a bolt on and that they stress it on full systems.

should i just do it anyway as a preventative measure?

<font color=green>I gotta study group at 11:00</font color=green>
 

·
Registered
Joined
·
863 Posts
Here's my experience. You DO NOT have to remap with the addition of a slip on. But you should /images/icons/wink.gif

Is the Gixx 600 FI or carbs?

After I added my slips I did a couple of Dyno runs and got 6 HP from them! That's pretty damn good for just slipons and no other mods. However, the power curve was not exactly what I'd call smooth. A little while later I got a Power Commander and loaded a map specifically designed for my pipes and WOW! What a difference. Linear power , no dead spots , no huge power hits..just great!

So, if you want the best your pipes and bike can give you then remap/rejet. But if you can't do it right now then don't worry about it. It won't hurt your bike, you'll still get power gains from the pipe and it'll look and sound great!

Later
 

·
Registered
Joined
·
4,780 Posts
Adding a PowerCommander to your GSXR may not add (much) more HP but it will make a huge difference when it comes to overall throttle response. The greatest improvement is at lower RPM's.

Overall, I would even recommend a PowerCommander to those without after market pipes/images/icons/wink.gif!

 

·
Registered
Joined
·
4,510 Posts
Discussion Starter · #4 ·
thanks fellas. i think that's gonna be second on the wishlist. right after frame sliders.

<font color=green>I gotta study group at 11:00</font color=green>
 

·
Registered
Joined
·
1,853 Posts
yep if u have the Yosh def get the Yosh EMS...i think it cost little more but alot more options..u can load up to 3 diff maps and have a switch where u can switch between the 3 maps on the fly...plus it has few other cool options..

 

·
Registered
Joined
·
1,245 Posts
I've talked to 2 different tuners and they both say the same thing. "Getting a PC and remapping a FI bikes is one of the first mods. anybody should get.

Let other people be right sometimes...it soothes them for being nothing else!
 

·
Registered
Joined
·
4,510 Posts
Discussion Starter · #8 ·
jmoney and rockinfigz...even with just a slip on?

<font color=green>I gotta study group at 11:00</font color=green>
 

·
Registered
Joined
·
1,245 Posts
Yes with a slip-on.

Let other people be right sometimes...it soothes them for being nothing else!
 

·
Registered
Joined
·
1,853 Posts
yes even with the slip on..i have a PCIII with a micron slip on and those were the first 2 things i installed soon as i got my bike home from the dealer..

Gxsr750y2k if im not mistaken i believe the software for the palmpilot and adaptor has been out for a while..

 

·
Registered
Joined
·
4,510 Posts
Discussion Starter · #15 ·
damn...EMS? or frame sliders and a swingarm stand? phuck this hobby's expensive! /images/icons/smile.gif

 

·
Registered
Joined
·
4,780 Posts
Only $100?! What are you waiting for/images/icons/tongue.gif/images/icons/laugh.gif?!

Make sure you get the spool type/images/icons/wink.gif.

 

·
Registered
Joined
·
4,510 Posts
Discussion Starter · #19 ·
but see, that's my question...stands and sliders or a yosh EMS? which should i get first.

 

·
Registered
Joined
·
4,780 Posts
Good point. Do you really need stands right now? I would say get the PC and the sliders and wait for the stands. Maybe buy some spools now too, that way if you need to use a stand you can borrow a friends/images/icons/wink.gif.

 
1 - 20 of 22 Posts
Top