Lowering a 93 CBR900RR
1 - 7 of 7 Posts
Joined
·
3,879 Posts
I have two friends with nice ones. I'll try to get in touch with them to get a look at the design and get back with ya.......(if I can remember!)
BA
"<font color=blue>How about never, is never good for you??</font color=blue>"
BA
"<font color=blue>How about never, is never good for you??</font color=blue>"
Joined
·
79 Posts
Try Shnitz Racing, thats where I got the lowering bone for the R1.. they might make something for the 900.. If not, you can allways have something made about 1/2-1 inch longer.. will drop it aprox 2 inches
![]()
Soall i need is to lengthen the "dogbone" about an inch and it will drop the bike 2"? It looks easy to make i fabricate stuff all the time for customers cars"i'm a performance mustang mechanic" I didn't know it was that easy..Any places that have a pic of the dogbones,just so i know i'm doing it right? or is it self explainatory? I have never lowered a bike before so it's all new to me..Thanks guys...
Steve
Steve
Muzzys sells lowering links and has a picture of them on their website. They are Kawasaki oriented and thus may not have them for your bike.
http://www.muzzys.com
I just made a set for myself, it was easy. Just used some aluminum plate that was the same thickness as the stock link, and used the stock link as a template. Go to this thread for more discussion and a picture
http://esport.sportbikes.com/cgi-bin/wwwthreads/showflat.pl?Cat=&Board=dragracing&Number=20334&page=0&view=collapsed&sb=5&part=1&vc=1
One tip - I matched drilled the new links (drilled them while sandwiched together) in a mill so that the holes would match up well.
Einstein says high speed slows time, so go fast, stay young!
http://home.satx.rr.com/jroberts
http://www.muzzys.com
I just made a set for myself, it was easy. Just used some aluminum plate that was the same thickness as the stock link, and used the stock link as a template. Go to this thread for more discussion and a picture
http://esport.sportbikes.com/cgi-bin/wwwthreads/showflat.pl?Cat=&Board=dragracing&Number=20334&page=0&view=collapsed&sb=5&part=1&vc=1
One tip - I matched drilled the new links (drilled them while sandwiched together) in a mill so that the holes would match up well.
Einstein says high speed slows time, so go fast, stay young!
http://home.satx.rr.com/jroberts
Hey Chief, forgot to mention that the one on the right in the picture is the stock link, but you probably figured that out. Glad I could help.
Einstein says high speed slows time, so go fast, stay young!
http://home.satx.rr.com/jroberts
Einstein says high speed slows time, so go fast, stay young!
http://home.satx.rr.com/jroberts
1 - 7 of 7 Posts
