Sportbike Racing Forum banner
1 - 1 of 1 Posts

78 Posts
Discussion Starter · #1 ·

Description Graves Motorsports Smog Block Off Plates. FITMENT: Yamaha R1 (2004-10) / R6 (2003-10) / R6S (2006-10)

Description: Graves Motorsports Smog Block Off Plates are designed to seal off the ports on the valve cover used by the air injection system (a.k.a smog pumps or AIS).

The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons.

Once these are capped off the air injection system can be safely removed. These Graves Smog Block Off Plates are made from CNC'ed billet aluminum and feature the Graves Motorsports G logo. There are two reasons why you want to remove the air injection system from your bike;

* 1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance.
* 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra fresh air in the exhaust stream. By removing the air injection system with Graves smog block plates you can achieve an accurate A/F ratio.

Graves Smog Black Off Plates are sold per pair

Call or email us for pricing our deal will not be beat

Thank you!

Team McCoy Motorsports
Email: [email protected]
Phone (606) 432-1556
web site:
1 - 1 of 1 Posts