Sportbike Racing Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
96 Posts
Discussion Starter · #1 ·
Is it possible to put an F3 airbox with ram air tubes, the F3 radiator, and carbs on an F2? A guy claims he had this setup on his F2 race bike and claims it adds about 8 MPH on the top end. I would like to put it on my race bike, but is this actually possible?

 

·
Registered
Joined
·
1,550 Posts
It is probably doable - the F2 and F3 are very similar. Though you might have to use the F3 tank in order for the airbox to fit...I'm not sure

-nominal_squid-
 

·
Registered
Joined
·
442 Posts
I've heard that its very possible....
The only probelm i heard was that the F3's have some type of bracket welded to the frame to support the air tubes or something like that and that would have to be welded on your f2.
I think its definately something that can be done but IMHO it seems like it would be way easier and cheaper to just buy an F3. You would probably need the radiator, air tubes, brackets, float bowl pressurization tubes, carbs, and whatever other tubing that the f3 has that the f2 does.
Then you'll either have to switch to f3 bodywork, or custom make some type of setup for the air tubes.
If you do get it done, post some pics i'd love to see how it came out.


Mike
92 CBR 600F2
"95% of Harleys are still on the road today.
5% actually made it home"
 
1 - 3 of 3 Posts
Top